HYPERPEN 8000U PRO - Graphic tablet AIPTEK - Free user manual and instructions

USER MANUAL HYPERPEN 8000U PRO AIPTEK

The product provides you with good-quality writing and drawing convenience. It offers you 7 kinds of software, including Tablet Manager, NetMeeting, CADIX, Pen Soft, Free Notes, Office Ink and Art Dabbler. With those applications, it's easier for you to interact with your PC and to do more creative works. To make the best use of the product, please read the contents carefully.

Safety Information

Avoid

• Dampening the products.
• Using volatile chemicals to clean the products.
• Dropping the products off the table or to the ground.
• Strongly bumping the products into hard stuffs.
• Stepping on the products.
• Putting heavy stuffs on the products.
• Disassembling the products.

If you find any problems, please have the device repaired by qualified personnel. Do not repair this device by yourself.

Chapter 1: Installation

Hardware

Step 1 Connect the Product with Your PC

Plug the USB cable into the USB port of your PC.

Step 2 Check the Power

Check the small square on the tablet. If the small square shows blinking light, your product is successfully powered.

Step 3 Insert the Battery

Unwind your pen and insert one AAA battery into the compartment, positioning the + and-ends as shown below. Then wind your pen.

Two black cylindrical objects with internal structures, one marked with a plus sign and the other with a minus sign (no text or symbols on the objects themselves)

* The battery life span is around one year.

□ Software

Step 1 Placing the CD driver

Place the installation CD in your CD drive.

Step 2 Showing Tablet

The screen shows the Tablet.

OR

If the screen doesn't show the Tablet, click Start and choose Run. Type "d" or where your CD drive is located and click OK.

Tablet Driver & Applications Tablet Driver Catalog Significant Net Smearing 3.01 Portfolio Free Notes & Office Ink e-Instructions

Step 3 Choosing the Application You Want

There are7 applications on the Tablet. They are Tablet Driver, Cardix Signature, Net Meeting 3.01, Free Notes, Office Ink and Pen Soft. To use Art Dabbler, please insert the other Art Dabbler CD driver. To choose the application, click the icon beside each application. Please follow the directions on the screen to install.

Note

The guidelines of Cardix Signature, Net Meeting 3.01, Pen Soft, Free Notes, Office Ink and Art Dabbler are not included in this user guide. To see more information of the applications, go to the Tablet. As you click the AP icon, the next screen shows the installation guideline icon on the right. This would be ineffective if your PC is unable to connect to the web.

Application	Use
Tablet Driver	Adjusts functions of the tablet and the pen in the Tablet.
Cardix Signature	Supports handwriting signature recognition when opening screen saver.
Net Meeting 3.01	Supports on-line handwriting talk.
Pen Soft	Supports handwriting recognition & annotation functions.
Art Dabbler (in the other CD)	Supports a variety of drawing functions.
Free Notes	Shows your real handwriting and drawing in Email.
Office Ink	Special handwriting inking in any software.

Chapter 2: Getting Started

Step 1 Click on the tablet icon at the bottom right of the tool bar (The tablet icon appears when the cable is plugged in.)

Step 2 You enter the Tablet screen. To select functions, click on buttons on the tool bar.

Print [name] menu [menu: menu] New Help Show Print Show Print Table1.doc (100%) Table2.doc (100%) Table3.doc (100%) Import/Export (1.5) OK Cancel

Using the Pen

Side buttons/

Click on Buttons to customize side buttons.

Upper button Lower button Pen point button.

Default settings

The upper button = left double-click mouse button.

The lower button = right mouse button.

The pen point = left mouse button.

Pressure/

Move the slide up and down to adjust the pen pressure.

Mouse/

The pen is used as normal handwriting pen or mouse. To change mode, select

"Pen" or "Mouse".

Please put your pen on the hollow of the tablet while idle. If you place the pen on the tablet, the mouse is seriously affected.

Pen Mouse

Using the Tablet

☐ Selecting the function keys

Steps

1. Click on the Function Key icon on the tool bar.
2. Key in the path name or URL.
3. Click "OK".

AutoCAD Subtitle About | Buttons | Mouse | Control | Functionality | Please press any IP: 000C or IRL for each location key: F1: New F2: Open F3: Close F4: Close F5: Set F6: Set F7: Copy F8: Paste Current Ids Page Based OK Cancel

□ Adjusting the workspace

The workspace of your tablet is in proportion to the size of the screen. To reduce the scope of the workspace, click "Control" and customize the size.

A3.0 Tabler About | Bottom | Width | Ctrl | Function/Inner Setting encoding Folding x: 0 y: 0 Screen Ratio Offset Left 100% inch Right 100% inch Extension Length(0): 1.65 inch M80-71 1.00 inch OK Cancel

Chapter 3: Q & A

No	Question	Answer
1.	Does Mac support the product?	Only for OS 9.0 version.
2.	Standard mouse can't move on the screen.	Remove the wireless pen from the tablet.
3.	The tablet can't work with the other PC peripherals.	Please go to upgrade new driver.
4.	What is proximity?	It's the height between the wireless pen and the tablet. Within a certain height, the wireless pen is effective on the tablet.
5.	What can't be put on the tablet?	Heavy stuffs or stuffs with frequency.
6.	PC screen is interfered when the tablet placed aside.	Move the tablet away from the PC screen.
7.	The pen has leaking problem	Go to the Tablet icon and click "Button". Then select "Pen offset value" to test the pen.
8.	No connection to the computer	Re-plug in the cable.

Einführung

AutoCAD Subtitle About | Buttons | Mouse | Control | Functionality | Please press any IP: 000C or IRL for each location key: F1: New F2: Open F3: Close F4: Close F5: Set F6: Set F7: Copy F8: Paste Current Ids Page Based OK Cancel

A3.0 Tabler About | Bottom | Width | Ctrl | Function/Inner Setting encoding Folding x: 0 y: 0 Screen Ratio Offset Left 100% inch Right 100% inch Extension Length(0): 1.65 inch M80-71 1.00 inch OK Cancel

Two black pens with a plus and minus signs, no visible text or symbols on the pens or body.

AutoCAD Subtitle About | Buttons | Mouse | Control | Functionality | Please press any IP.000 or URL to match location key: F1: New F2: Open F3: Close F4: Close F5: Set F6: Set F7: Copy F8: Paste Current Ids Page Based OK Cancel

A3.0 Tabler About | Bottom | Width | Ctrl | Function/Inner Setting encoding Folding x: 0 y: 0 Screen Ratio Offset Left 100% inch Right 100% inch Extension Length(0): 1.65 inch M80-71 1.00 inch OK Cancel

Mouse. Penna Mouse

USB Token Allow | Buttons | Mouse | Control | Functionality | Phone reset and IP, OOC or URL format location key: F1: New F2: Open F3: New F4: New F5: Last F6: Last F7: Last F8: New F9: New Current field Browse Page Based OK Cancel

LGB Sub About | Bottom | Inner | Ctrl | Functioning | Setting offsetting Folding x: 0 y: 0 Offset Left: 100.00 inch Right: 100.00 inch Extension Length(0): 2.50 inch MGA71: 2.50 inch OK Cancel

Capitolo 3: D & R

Two black cylindrical objects with a plus and minus signs, one larger and one smaller, connected by a line (no text or symbols visible)

AutoCAD [title] [title] [title] User C:\Users\MyBlock Win Win-Blending Win-Blending Table10001 (1000) Table2004 (1000) Table3004 (1000) Interference 1.0 Performance 1.0 OK Cancel

Utilizando la pluma

Botones laterales/

A3.0 Tabler About | Bottom | Width | Ctrl | Function/Inner Setting encoding Folding x: 0 y: 0 Screen Ratio Offset Left 100% inch Right 100% inch Extension Length(0): 1.65 inch M80-71 1.00 inch OK Cancel

Capítulo 3: P & R

New [name] new [size] new [format] New Name Type New Format Table100 (100%) Table200 (100%) Table300 (100%) Form100 (1.0)

De pen gebruiken

□ Zijknoppen/

AutoCAD Subtitle About | Buttons | Mouse | Control | Functionality | Please press any IP.000 or URL to match location key: F1: New F2: Open F3: Close F4: Close F5: Set F6: Set F7: Copy F8: Paste Current Ids Page Based OK Cancel

A3.0 Tabler About | Bottom | Width | Ctrl | Function/Inner Setting encoding Folding x: 0 y: 0 Screen Ratio Offset Left 100% inch Right 100% inch Extension Length(0): 1.65 inch M80-71 1.00 inch OK Cancel

Two black cylindrical objects with internal structures, one open and one closed, showing no visible text or symbols.

AutoCAD Subtitle About | Buttons | Mouse | Control | Functionality | Please press any IP.000 or URL to match location key: F1: New F2: Open F3: Close F4: Close F5: Set F6: Set F7: Copy F8: Paste Current Ids Page Based OK Cancel

A3.0 Tabler About | Bottom | Width | Ctrl | Function/Inner Setting encoding Folding x: 0 y: 0 Screen Ratio Offset Left 100% inch Right 100% inch Extension Length(0): 1.65 inch M80-71 1.00 inch OK Cancel

Capítulo 3 : Perguntas e Respostas